Web Site Search

W-1™ Wax & Buff Wipes for Live-Line Tool Maintenance Meet OSHA Live-Line Tool Standard for Hot Stick and Boom Maintenance

OSHA states that: Hot Sticks, booms, and other live-line tools "... can become electrically unsafe because of ... a combination of wetting, surface contamination, and a loss of surface gloss ..." and " ... the best defense against accidents is a clean, glossy stick that causes water to bead up ..."

OSHA demands that: "Live-line tools ... shall be removed from service every two years ... for examination ... and shall be cleaned and waxed ..." Click here for the OSHA reg.

W-1™ Fiberglass Wax & Buff Wipe satisfies the waxing portion of this requirement and offers these features:

• Convenient, Wax-Saturated, Lint-Free Wipe
  
  
• Dual Action Tandem Pack Includes Dry Buffing Towel
  
  
• Superior Quality, Fast-Hazing Fiberglass Wax
  
  
• Suitable for Rubber and Porcelain Materials Too
  
  
• Easy to Apply
  
  
• Does Not Remove or Adversely Affect Gel Coat
  
  
• Leaves Non-Conductive Water Repellent Coating
  
  
• Prevents Continuous Water Film on Stick in Wet Weather
  
  
• Designed for One Time Use and Easy Disposal
  
  
• Meets IEEE Maintenance Recommendations (Std #978)

CATALOG NUMBERS
Catalog No.	Package Size	Units/CS	Image
W-1	Wax-Saturated Wipe with Dry Buffing Towel	72
W-16	16 ounces of Fast-Hazing Fiberglass Wax	12

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

11222 60th ST N | Stillwater, MN 55082-9310 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)

Copyright © 2001 - 2016 American Polywater Corporation | 6/23/16