American Polywater Logo -- click to return to homepage white space
Web Site Search

Pulling Lubricants Blowing Lubricants Cable Cleaners Cable Pulling Software
Sealants Adhesives MRO Aerosols Free Training & Product Demonstration Videos Calculators
Home | About | Literature | Site Map | MSDS | Contact | Engineers | Shows | Links | Samples | RFQ | Catalog Numbers

95% Pure Zinc!

CG

Cold Galvanizing Spray
for Weld Coating, Metal Protection and Repair


Type CG® Cold Galvanizing -- Industrial Aerosol Spray for Metal Protection and Repair. Contains 95% Pure Zinc. Forms zinc-rich Coating That Prevents Rust and Inhibits Corrosion. Easy On-The-Job Application. Ideal Primer or Touch-Up Paint. Quick Drying with no Chlorinated Solvents. Excellent for Weld coating.


Type CG Cold Galvanize is an industrial aerosol coating for metal protection and repair. Powerful CG contains 95% pure zinc; when sprayed on metal it forms a zinc-rich coating that prevents rust and inhibits corrosion through sacrificial galvanic action. Type CG aerosol offers easy on-the-job application, and is ideal as a primer or for touch-up. Quick drying CG contains no chlorinated solvents, and is excellent for weld coating.

ADVANTAGES

  • Protects metal
  • Prevents rust and inhibits corrosion
  • Excellent for weld coating
  • Contains no listed carcinogens
  • Contains no CFC's or HCFC's
  • Contains no chlorinated solvents
  • Ideal as a primer or touch-up paint
  • Similar to hot-dip galvanizing
  • Efficient nozzle minimizes drips/runs
  • Dries quickly
  • Easy on-the-job application

  • APPLICATIONS

  • Damaged galvanized steel
  • Metal equipment and boxes
  • Welded parts and welds
  • Springs and coils
  • HVAC equipment
  • Pipes and water tanks
  • Flood restoration and repair
  • Paint primer and touch-up
  • Much, much more

  • USE DIRECTIONS

    Apply to clean, dry metal surfaces. Brush off loose rust or scale. Clean surface with Type HP™ or Type FD™ Cleaner/Degreaser as necessary. Shake the can vigorously until internal agitator rolls freely. Spray using light, even strokes about 18" (1/2 m) from the surface. Several thin coats are recommended. Allow 15 minutes drying time between coats. Final coat should dry thoroughly (up to 24 hours). To avoid clogging, invert can and spray until only air escapes.

    CATALOG NUMBERS
    Type CG Package Size Units/CS Image
    CG-13 16 fluid oz (475 ml) aerosol can with spray nozzle. Net wt 13 oz. 12 Type CG™ Cold Galvanizing -- Industrial Aerosol Spray for Metal Protection and Repair. Contains 95% Pure Zinc. Forms zinc-Rich Coating That Prevents Rust and Inhibits Corrosion. Easy On-The-Job Application. Ideal Primer or Touch-Up Paint. Quick Drying with no Chlorinated Solvents. Excellent for Weld coating. Catalog #CG-13 shown.


    View this flyer in Chinese

    Click here for an MSDS on this product

    Click here to Request a Quote on this product

    Click here to Add Your Name To Our Mail List

    Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

    Ask for Polywater® products by name at your local authorized distributor.

    Home | About | Site Map | Literature | Samples | Links | Reps | Videos | Pumps | RFQ
    Codes | Engineering | Shows | Spotlight | Newsletters | MSDS | Translations | Contacts | Jobs


    American Polywater Corporation -- The world's leading manufacturer of cable pulling lubricants, cable cleaners, and MRO & construction chemicals.
    11222 60th ST N | Stillwater, MN 55082-9310 USA
    1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
    1-(800) 328-9384 (Toll-Free US/Canada Only)

    Copyright © 2001 - 2015 American Polywater Corporation | Polywater Updated 6/5/156/5/15