Home | Products | Representatives | Resources | SDS | Contact

Easy to Use Polywater® FTTx Concentrated Liquid Lubricant Convenient Lubricant for Small Cables with Spray or Wipe Application

Polywater® FTTx Fiber Lubricant makes the installation of fiber drops easy.   The lubricant is concentrated, only a thin film is required for immediate tension reduction that lasts even as the lubricant dries.   Spray or wipe the cable or conduit.   Quick and easy to use without mess or excess lubricant.

Perfect for Fiber Optic Drops Non-Staining, Quick Clean-Up Easy Application with Spray or Wipe Lubricates with Very Thin Film, Performs After Drying Compatible with Common Cable Jackets – Including Polyethylene Helps Prevent "Wet Link" Insertion Loss in Category 6 Data Cables

Application and Usage Directions

Polywater® FTTx Lubricant is easy to apply.   It can be sprayed into conduit or wiped onto cable, making the installation of multiple drops quick and convenient.   Use Polywater® FTTx to insure fast installation without mess.

SPRAY
Inject 5 to 10 sprays directly into conduit just before pulling or pushing.   For larger conduit or longer pulls, spray additional lubricant onto the cable or into the conduit if the tension increases.

WIPE
Wipe cable as it enters conduit or attach wipe to pulling line to prelubricate conduit.   One towel is sufficient for small cable and for installations or drops under 200 feet.   Use additional lubricant wipes on longer pulls or when tension increases.

Polywater® FTTx Spray Lubricant remains effective with very thin, molecular-level films, so it continues to lubricate even when it can not be detected.

CATALOG NUMBERS
FTTx	Package Size	Units/CS	Image
FTTx-D20	20-count saturated wipe dispenser	12
FTTx-35LR	1-quart (.95 liter) bottle with sprayer	12
FTTx-35	1-quart (.95 liter) bottle	12	NONE
FTTx-128	1-gallon (3.8 liter) pail	4	NONE
FTTx-640	5-gallon (18.9 liter) pail	1	NONE

*Contact American Polywater for specific recommendations on LSZH/LSHF or CSPE cable jacket types.

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

This website uses third party cookies to analyze navigation and to improve the quality of the user experience. If you continue browsing, you accept cookie use as set out in our Privacy Policy. Address: 11222 60th Street N, Stillwater, MN 55082, USA Phone: +1 651 430-2270 | Fax: +1 651 430-3634 | Phone: 800 328-9384 (Toll-Free USA/Canada) General Email: Email Contact Page