BonDuit^® Adhesive creates airtight and watertight splices.   Bonds are durable with high tensile strength within an hour.   The strong bonds withstand movement and vibration.

Field Application Tip: Use long-barreled couplers.   They can double pull-out strength!   Deeper coupler insert depths provide more surface contact area for BonDuit^® Adhesive to work its magic.   It's a good way to add strength for just pennies more.

BonDuit^® Adhesive requires no special training and minimal labor.   Total installation time is less than 5 minutes.   Convenient kit contains all material to make the connection.   BonDuit^® provides a low-cost solution compared to alternative methods. Click here to view the written BonDuit^® Application Instructions, or here for a short 6-minute Application Demo Video.

Cold Weather Information: Keep BonDuit^® warm for optimal performance.   Warm BonDuit^® will cure and produce perfectly functional seals in ambient temperatures as low as 40° F (4° C).   Below 60° F (16° C) the unmixed BonDuit^® components thicken and become difficult to dispense from the cartridge.   Keep BonDuit^® indoors or in the warmest part of a service truck until use.

Click for Larger Images

Polyethylene to Polyethylene	Polyethylene to Fiberglass	Polyethylene to Steel

*International export regulations prohibit inclusion of the dispensing tool in kits.
Please order the tool (cat #TOOL-50-11) separately for international destinations.

BonDuit® Catalog Numbers
Product Code	Package Description	Units/CS	Image
BT-KITG*	2 adhesive cartridges 8 mixing nozzles 1 strip of sanding cloth 8 RP-1 cleaning wipes 1 dispensing tool. (Only Sold in the USA)	1
BT-KIT	2 adhesive cartridges 8 mixing nozzles 1 strip of sanding cloth 8 RP-1 cleaning wipes. (Dispensing tool not included)	1	None
BT-KITB6G*	12 adhesive cartridges 48 mixing nozzles 6 strips of sanding cloth 48 RP-1 cleaning wipes 1 dispensing tool (Only Sold in the USA)	1	None
BT-KITB6	12 adhesive cartridges 48 mixing nozzles 6 strips of sanding cloth 48 RP-1 cleaning wipes (Dispensing tool not included)	1	None
BT-CART12PK	12 adhesive cartridges 36 mixing nozzles	1	None
TOOL-50-11	1 Dispensing tool	1
MXR-12T-10	10 Mixing nozzles	1	None
RP-1	Saturated 5" x 8" pre-treated wipe	96

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

This website uses third party cookies to analyze navigation and to improve the quality of the user experience. If you continue browsing, you accept cookie use as set out in our Privacy Policy. Address: 11222 60th Street N, Stillwater, MN 55082, USA Phone: +1 651 430-2270 | Fax: +1 651 430-3634 | Phone: 800 328-9384 (Toll-Free USA/Canada) General Email: Email Contact Page